User Manual

9.1 FACTORY RESET
To reset the DALI KATCH ONE to the factory state;
1. Stop any playback to the DALI KATCH ONE
2. Turn off the DALI KATCH ONE (See 3.2)
3. Press and hold the Sound mode toggle button
(Button
6
) and press the Power ON/OFF
button (Button
3
) until an audio indication
is played
4. Release both buttons
5. All the indicator LED’s turn on and the
firmware version is shown (See 9.3)
6. Wait for about 10 seconds
7. Turn off the DALI KATCH ONE (See 3.2)
8. The unit is now reset
9.2 FIRMWARE UPGRADE
Download the latest firmware from our website and unzip
the file to your Windows computer.
Use the DALI Tool included in the firmware download to place
the firmware file on a USB memory stick. Insert the USB
memory stick into the USB Power Out / Service connector.
1. Unplug your DALI KATCH ONE (See 3.2)
2. Insert the USB stick into the USB Power Out / Service Port
3. Power on your DALI KATCH ONE (See 3.1)
4. Wait for the Power LED next to the USB Power Out /
Service Port to start blinking
5, Remove the USB stick for the USB Power Out / Service Port
6. The DALI KATCH ONE is now updated
Look for new firmware here:
www.dali-speakers.com/katchone
16
9.0 FACTORY RESET & FIRMWARE UPGRADE