Whitepaper

8
Figure 4, Half section view of LEKTOR
®
1, notice the flared bass reflex ports, which
will lower air speed in the ports. Consequently port turbulence is reduced.
All bass reflex ports are positioned on the baffle (except for LEKTOR
®
8), meaning
that the speakers can be positioned very close to the wall without compromising the
bass reflex output.
The floor standing LEKTOR
®
6 and 8 both come with both spikes (with M8 metric
thread) and rubber feet, which can be mounted to the build-in machined inserts
underneath the speakers.
The compact models come with rubber feet, which can be mounted underneath the
speaker or on the rear edge of the speakers, if wall mounting is desired.
LEKTOR
®
1, 2, 3 and LCR are suitable for positioning in/on a shelf or on-wall. They
all come with integrated wall mounting bracket(s) for easy mounting of the speaker.
Additionally LEKTOR
®
2 and 3 can be positioned on a stand.
Grilles
The grilles for the LEKTOR
®
speakers are designed to minimize edge diffraction and
reflections. This is done by minimizing reflective surfaces on the grilles. The grilles
are thereby optimized to compromise the sound as little as possible.
The grilles are mounted with precision machined standoffs that are fixed in
decorative aluminum snap locks on the edge of the baffle.