Operation Manual
Running-in
Like any other mechanical system, a speaker needs to be "run in", so you
can look forward to a gradual improvement in sound quality over the ini-
tial period. Unlike other mechanical systems, a DALI speaker does not wear
out - in fact, regular use will extend its lifetime.
Connection
The connection to your amplier is extremely important for your sound
experience.
Always turn off your amplier before connecting any cables or altering
any connections.
Always use cables of the same type and length for left and right speak-
ers. We recommend using special speaker cables from DALI, available from
your dealer.
For the perfect sound experience, the right speaker must be connected to
the output terminal marked "R" or "Right" on your amplier and the left
speaker to the terminal marked "L" or "Left".
A detail that is often overlooked is connection in the correct phase, i.e. the
red terminal (+) on the amplier should be connected to the red terminal
(+) on the speaker, and the black terminal
(-) on the amplier should be connected
to the black terminal (-) on the speaker.
(Fig. 1) If just one speaker in a stereo or
surround sound system is not connected in
phase, the bass will be weak and the over-
all sound will be diffuse.
Always switch off your amplier before adjusting any of the cables!
4
English
Fig. 1. Stereo connection