DALI WSR Wireless Subwoofer Receiver MANUAL
Contents 2 Introduction 1. WSR Overview 3 2. Unpacking 4 3. Installation and Setup 5 3.1 Location 5 3.2 Installing and Switching On 6 3.3 Wireless Connections 7 4. Using your DALI WSR 9 5. Maintaining your DALI WSR 10 6. Technical Specifications 11 Thank you for choosing the DALI WSR (Wireless Subwoofer Receiver).
1. WSR Overview The DALI WSR is a wireless subwoofer receiver that enables active subwoofers such as the DALI E-9 F or E-12 F to be connected wirelessly to either a DALI SOUND HUB or SOUND HUB COMPACT wireless streaming preamplifier. The DALI WSR is intended to be located close to the subwoofer and connects to its input via the supplied RCA Phono cable. Once connected to mains power via a standard USB mains adaptor, the WSR will become available for wireless connection to a SOUND HUB or SOUND HUB COMPACT.
2. Unpacking The contents of the DALI WSR pack is illustrated in Diagram 1 and listed below. 1: WSR 2: USB power supply cable 3: RCA Phono cable 4: Document pack DIAGRAM 1 DALI WSR ×1 ×1 ×1 NOTE We suggest that you keep your WSR packaging for future use. However, if that is not possible please dispose of it responsibly.
3. Installation and Setup 3.1 Location Your DALI WSR can be located predominantly as is convenient for you and your home, although it should be close by the subwoofer to which it is to be connected. It also needs to be within reach of a mains power socket. The WSR can be placed on a furniture unit or shelf, or on or behind the subwoofer itself.
3.2 Installing and Switching On Begin your DALI WSR installation process by following the steps below. DIAGRAM 2 • Ensure that the subwoofer is switched off. If the subwoofer has no power switch, we recommend that it is disconnected from mains power while WSR connections are made. LFE input Reset button C A • Use the supplied RCA Phono cable to connect the output socket of the WSR to the LFE input socket of the subwoofer A . The output socket of the WSR is highlighted in Diagram 2.
3.3 Wireless Connections Once your WSR is installed and switched on, you can begin the process of connecting it wirelessly to your SOUND HUB or SOUND HUB COMPACT. This is described in the following steps. DIAGRAM 3 A Press the LINK & CONNECT button on the SOUND HUB/ SOUND HUB COMPACT. B Press the LINK & CONNECT button on the WSR. • Ensure your SOUND HUB or SOUND HUB COMPACT is switched on, then press the LINK & CONNECT button on its rear panel A .
3.3 Wireless Connections • When connection is established between the WSR and the SOUND HUB or SOUND HUB COMPACT, the “SUB Setup Status” indicator will flash slowly. The subwoofer will play a short confirmation tone. DIAGRAM 4 C Press the LINK & CONNECT button on the SOUND HUB/ SOUND HUB COMPACT. • With the WSR connected to the SOUND HUB or SOUND HUB COMPACT, the WSR will be assigned to the subwoofer channel automatically.
4. Using your DALI WSR With your DALI WSR connected wirelessly to your SOUND HUB or SOUND HUB COMPACT you can begin to enjoy the benefits. If you have previously enjoyed a subwoofer connected to your SOUND HUB or SOUND HUB COMPACT via their wired subwoofer outputs, you will probably already have set up the subwoofer and other speakers to work together. If this is the case you may not need to adjust any settings.
5. Maintaining your DALI WSR Your DALI WSR should not require any special treatment beyond the kind of care that you would give other high value items in your home. Use a soft dry cloth to dust off the case. We do not recommend the use of any cleaning fluids or sprays, but if you wish to use furniture polish, apply it to a cloth rather than directly to the case. If at any time you need to connect your DALI WSR to a different SOUND HUB or SOUND HUB COMPACT, you will need to reset it to its defaults.
6. Technical Specifications DALI WSR Wireless Subwoofer Receiver 11 Signal sample rate 96 kHz Signal resolution 24 bit Audio input Wireless audio interface Audio output Mono RCA connector Audio output level 2 VRMS Power supply input USB type C (5 V DC, 0.5 A) Service port USB type A Dimensions (W × H × D) 76 × 62 × 25 mm 2.99 × 2.44 × 0.98 inches Weight 59 grams 0.
