User's Manual

25
WARNING
Adjustments
1 Program the Travel
Without a properly installed safety reversal system, persons (particularly small children) could be
SERIOUSLY INJURED or KILLED by a closing garage door.
· Incorrect adjustment of garage door travel limits will interfere with proper operation of safety reversal
system.
· After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on
contact with 1-1/2" (3.8 cm) high object (or 2x4 laid flat) on floor.
1.1 Press and hold the SETTING
Button until the screen show “1”.
1.2 Press and hold the UP Button until
the door in the desired UP position.
1.3 Once the door in the desired UP position
press and release the SETTING Button. The
screen will show “2”.
NOTE: The UP and DOWN Buttons can be
used to move the door up and down as needed.
1.4 Press and hold the DOWN Button until
the door in the desired DOWN position.
NOTE: The UP and DOWN Buttons can be
used to move the door up and down as needed.
1.5 Once the door is in the desired DOWN
position ,press and release the SETTING
Button. The screen is flashin
g
“｜｜”.
THE