User's Manual

WARNING

Option B The “CLOSE” position force sensitivity

4 Test The Photo Eye Safety System

Without a properly installed safety reversing sensor, persons (particularly small children) could be

SERIOUSLY INJURED or KILLED by a closing garage door.

4.1 Open the door. Place the garage door opener

carton in the

ath of the door.

4.2 Press the remote control push button to close the door.

The door will not move more than an inch (2.5 cm), and the

garage door opener lights will ﬂash 10 times.

3.1B

Press and hold the SETTING Button

until the screen show the number from

“1” to “3”.

3.2B Press and release the UP Button and the

screen show the “∩”

3.3B Press and release the SETTING Button and

the screen show the levels of the force

sensitivity.

3.4B

Use the UP Bottom to increase the levels, press the

DOWN Bottom decrease the levels . The screen

show the number of the levels.

3.5B Press and release the SETTING Button and the

screen is flashing “｜｜”. Adjustments is complete.