User Guide

11
Sample installation - Am. Flyer GP-7
When mounting in a GP-7, things get a bit tight. Shown is how to place the main board. The sw/vol board may be placed so
that the controls show through the bottom where the reversing unit lever was already punched out as shwon below. The
speaker chamber could be made towards the front of the engine, possibly utilizing the cab area by the windows.
Although the following sample installations show diesel
locomotives all is applicable to Electric's
no lights Headlight Headlight and
Number Boards
Rear Marker
Lights and
Number Boards
Number Boards
and Interior
Lights
Marker Lights