User Guide

Track power installation without batteries
speaker
Gray
Horn
Bell
Reed Switch
(physical)
Black
White
either rail may be used. Right / Left
only used for reference.
Left Rail
pickup
Right Rail
pickup
lighting
circuits
DC
motor
Red
Gray
Red - no connection
3
DC track power installation using standard batteries
Battery power - must not exceed 35 volts DC. Use one 9 volt battery or a string of 6 AA
or AAA batteries. Battery life depends on the volume setting and speaker impedance.
Typical operation of most sound systems, with one good 9 volt battery, is about 8 hours,
AA or larger mahr (milliamp hour) batteries is well beyond 50 hours!
speaker
ON / OFF
switch
+
–
Red
Gray
#524 SPDT switch.
Switch shown in the OFF
position. Drawn as a spst.
9V, or 6-AA,
or 6-AAA
batteries
– +
Horn
Bell
Black
White
either rail may be used. Right / Left
only used for reference.
Left Rail
pickup
Right Rail
pickup
lighting
circuits
DC
motor
Red - no connection
Red - no connection