User Guide

12
Output can be adjusted from 1.25 to 6.2 volts. Input can be up to 30 volts DC,
DCC, or AC. Powers 30 of our 1.2mm colored 1.5v lamps (Red #384, Yellow
#385, Green #386), 12 #382 lamps, 8 #383 or #756 lamps.
With two diodes and light bulbs, you can also use this module to achieve
directional lighting. The drawing for this is on our web site as well.
1.25"w x 1"l x 0.35"h
alternative lighting
you might also want to consider installing our Adjustable Regulated Lighting board. The RL-ADJ (item 379) comes with four 2.7v lamps (item 383) but is capable of driving eight lamps, as shown. You can
set the intensity desired (1.25 - 6.2 volts). It maintains constant voltage to the lamps and requires nothing more for our standard DC sound systems or LocoMatic™ compatibility. Simply install the lamps
where desired, connect the input power, and peel the tape to secure. The unit can be broken into smaller strip lengths where needed. All the way down to 2" for the power module. Install in cabooses,
passenger cars, or buildings. Measures only 1/2" wide. Extra, low voltage lamps, are available. We also offer 1.5 volt lamps in various colors. See our Catalog or Web site for more details.
Like the RL-ADJ (item 379), the VRS (item 378) offers the same adjustments in a super small size. It is capable of driving 1/2 ampere of current, like the 379. This amounts to eight 2.7v lamps (item 383),
as shown above or our small 1.5 volt lamps as well (see our catalog or web site for details on other lamps). You can set the intensity desired (1.25 - 6.2 volts). It maintains constant voltage to the lamps
and requires nothing more for our standard DC sound systems or LocoMatic™ compatibility. Simply install the lamps where desired, connect the input power, and secure the board. There are also no
connections on the back side of this board so it can be mounted flush to any area. Install in cabooses, passenger cars, or buildings. Measures only 1.25" w x 1" l x 0.35" h.