User`s manual

20 PRELIMINARY 1M28 and 1M75 User’s Manual

03-32-00525-03 DALSA

2.3 Input/Output

WARNING: It is extremely important that you apply the appropriate voltages to your

camera. Incorrect voltages will damage the camera.

2.4 Default Settings

The camera power-ups for the first time with the following default settings.

Table 5: Default Settings

Specifications 1M28 1M75

EXSYNC Internal, free-running Internal, free-running

Data output 8-bits 8-bits

Output response Linear Linear

Gain 1x 1x

Resolution Full-resolution, 1024 x 1024 Full-resolution, 1024 x 1024

Exposure time 10 ms 12 ms

Frame rate 20 fps 25 fps

Data rate 28MHz 2x40MHz

2.5 Connectors

Please refer to the Camera Link standard for detailed information on signal levels and

timings.

Table 6: Pinout of the MDR26 camera connector for the Camera Link interface

Camera Link Cable

Base Configuration

One Channel Link Chip + Camera Control + Serial Communication

Camera Connector Right Angle Framegrabber Channel Link Signal

1 1 inner shield

14 14 inner shield

225 X0-

5V and Ground

™

iagnostic LED