User`s manual

1M28 and 1M75 User’s Manual PRELIMINARY 29
DALSA 03-32-00525-03
3
Software Interface:
Software Interface:Software Interface:
Software Interface:
Controlling the Camera
Controlling the CameraControlling the Camera
Controlling the Camera
3.1 Overview
Many camera features can be controlled through the serial interface. The camera can also
be used without the serial interface after it has been set up correctly.
To configure the camera through the serial interface, you must use the PFRemote
configuration tool. For details on using the PFRemote, refer to section 3.2 PFRemote
Configuration Tool on page 30.
You can also configure the camera through the PFLIB application programming interface.
For more information, refer to section 3.5 PFLIB API Commands on page 40.
Camera Serial Port Defaults
• 8 data bits
• 1 start bit
•1 stop bit
•No parity
•9.6Kbps