User`s manual

Pantera TF 1M60 and 1M30 User’s Manual Preliminary 13

DALSA 03-32-10033-08

Data Connector

Figure 7: MDR26 Connector

MDR26 Female

Mating Part

: 3M 334-31 series

Cable:

3M 14X 26-SZLB-XX X-0LC

Table 4: MDR26 Connector Reference

Item Value Item Value

Pinout BASE Pinout BASE

1 GND 14 GND

2 X0- 15 X0+

3 X1- 16 X1+

4 X2- 17 X2+

5 Xclk- 18 Xclk+

6 X3- 19 X3+

7 SERTC+ 20 SERTC-

8 SERTFG- 21 SERTFG+

9 CC1- 22 CC1+

10 CC2+ 23 CC2-

11 CC3- 24 CC3+

12 CC4+ 25 CC4-

13 GND 26 GND

Notes:

*Exterior Overshield is connected to the shells of the connectors on both ends.

**3M part 14X26-SZLB-XXX-0LC is a complete cable assembly, including connectors.

Unused pairs should be terminated in 100 ohms at both ends of the cable.

Table 5: DALSA Camera Control Configuration

Signal Configuration

CC1 EXSYNC

CC2 Spare

CC3 Spare

CC4 Spare

Digital Data

The camera digitizes internally to 12 bits and has a user selectable output of 8, 10, or 12

bits in LVDS format on the Camera Link connector. You can select the output using the

oms command. For details, see section 3.5 Setting the Data Mode.