User`s manual
Pantera TF 1M60 and 1M30 User’s Manual Preliminary 53
DALSA 03-32-10033-08
Item (when programmable configuration the
options are separated with a | )
1M60 1M30
Tap Clock Rate <xx MHz> 40 40
Camera Standard <NTSC, PAL, VS, VW, MW> VS VS
Variable Window
<Column Start, Column End, Row Start, Row End>
(0,0,0,0) (0,0,0,0)
Multiple Window
Number of Windows, (Column Start 1, Column End 1, Row
Start 1, Row End 1) (Column Start 2, Column End2, …
0,(0,0,0,0) 0,(0,0,0,0)
Camera Color
<Hybrid, Mono, Pattern, Solid>
Mono Mono
Pattern Size
<(T1,Columns*Rows)(T2,
Columns*Rows)(T3,Columns*Rows….>
(T0, 1*1) (T0, 1*1)
Color Definition
<T1= R,G,B, CY, MG, Y, or M>
(T0=(1.1M) (T0=(1.1M)
Row Color Offset <0,1,2,3…> 0 0
Column Color Offset <0,1,2,3…> 0 0
Number of Camera Configurations<1,2,3,…> 2 2
Configuration Definition
Cx= HDW, Number of Output Taps, Bit Width, Number of
Processing Nodes where
Cx is the configuration ID x is <1,2,3…>
HDW is <Base, Medium, Full>
Number of Output Taps is <1,2,3…>
Bit width is <8, 10,12…>
Number Processing Nodes is <1 or 2>
C1 = Base 2,12,1
C1 = Base 1,12,1
Tap Reconstruction
In some configurations the reconstruction may change. C0
is the default output format and must be listed. Output
configurations that don’t conform are listed separately.
<Cx,Tn (Column Start, Column End, Column Increment,
Row Start, Row End, Row Increment>
CO,T1(1,512,1,1,
1024,1)
CO,T2(513,1024,
1,1,1024,1)
N/A
Row Binning Factor <1,2,3 or 1|2|3> 1|2|4 1|2|4
Column Binning Factor <1,2,3 or 1|2|3> 1|2|4 1|2|4
Pretrigger Pixels <0,1,2…or 0..15> 0..15
(programmable)
0..15
(programmable)
Pretrigger Lines <0,1,2.. or 0..15> 0 0
Line/Frame Time Minimum <xx ns> TBD TBD
Line/Frame Time Maximum <xx ns> TBD TBD
Internal Line/Frame Time Resolution
<xx ns> 0 if not applicable
N/A N/A
Pixel Reset Pulse Minimum Width
<xx ns> 0 if not applicable
N/A N/A
Internal Pixel Reset Time Resolution
<xx ns> 0 if not applicable
N/A N/A
Pixel Reset to Exsync Hold time <xx ns> TBD TBD
BAUD Rate <9600….> 9600 9600
CC1 <Exsync> Exsync Exsync