User`s manual

PANTERA 22M User’s Manual 43
Teledyne DALSA 03-032-20049-02
PANTERA 22M Interface Parameters
Table 2: Frame Grabber Interface Parameters (Unverified)
Item (when programmable configuration the
options are separated with a | )
PANTERA 22M
Imager Dimension <1,2 or 1| 2>
2
Imager Columns<number of active columns, X>
4008
Imager Rows<number of active rows, Y> Line Scan/ TDI
are defined as 1
5344
Num ber of Im ager Tap s <1,2,3…..>
4
Tap Clock Rate <xx MHz>
27
Camera Standard <NTSC, PAL, VS, VW, MW>
VS
Variable Window
<Column Start, Column End, Row Start, Row End>
(0,0,0,0)
Multiple Window
Number of Windows, (Column Start 1, Column End 1,
Row Start 1, Row End 1) (Column Start 2, Colu m n End 2, …
0,(0,0,0,0)
Camera Color
<Hybrid, Mono, Pattern, Solid>
Mono
Pattern Size
<(T1,Columns*Rows)(T2,
Columns*Rows)(T3,Columns*Row s….>
TBD
Color Definition
<T1= R,G,B, CY, MG, Y, or M>
TBD
Row Color Offset <0,1,2,3…>
0
Column Color Offset <0,1,2,3…>
0
Num ber of Cam era Configurations<1,2,3,…>
TBD
Configuration Definition
Cx= HDW, Number of Output Taps, Bit Width, Number of
Processing Nodes where
Cx is the configu ration ID x is <1,2,3…>
HDW is <Base, Medium, Full>
Num ber of Outpu t Taps is <1,2,3…>
Bit w id th is <8, 10,12…>
Number Processing Nodes is <1 or 2>
C1 = Base 4, 12, 1
C2 = Base 4, 10, 1
C3 = Base 4, 8, 1
Tap Reconstruction
In some configurations the reconstruction may change. C0
is the default output format and must be listed. Output
configurations that d on’t conform are listed separately.
<Cx,Tn (Column Start, Column End, Column Increment,
Row Start, Row End, Row Increment>
TBD
Row Binning Factor <1,2,3 or 1| 2| 3>
1
Column Binning Factor <1,2,3 or 1| 2| 3>
1
Pretrigger Pixels <0,1,2…or 0..15>
TBD
(programmable)
Pretrigger Lines <0,1,2.. or 0..15>
0
Frame Time Minimum <xx us>
278 000
Frame Time Maximum <xx us>
TBD
Internal Frame Time Resolution
<xx us> 0 if not applicable
1