Installation manual

Version 02 teledynedalsa.com/ipd 16
The Sherlock Embedded Web Server is a portal through which the BOA Pro vision
system can be Monitored when running or inspecting. This interface is also used for
upgrading the BOA Pro firmware. The web server is accessed from a host PC using a
Web Browser. The following browsers have been tested: Microsoft Internet Explorer
version 8, Mozilla Firefox 5.0.1, Google Chrome 13.0.782.220.
Sherlock Embedded Web Server
1. Open the web browser on an address compatible PC connected to the camera
2. Enter the URL address of the camera in the address bar and press Return.
3. The camera web server interface will be displayed in the browser as follows:
4. The web server provides a quick snapshot of the state of the camera and provides
controls for Monitoring a running inspection, IP address setup, firmware
upgrading, and a command console. The web server can be password protected
to prevent unauthorized access. The Monitor page can be accessed without a
password.
5. The web server interface is not password protected in the factory configuration,
and is always logged in by default. If you click on “logout” only the “Run Monitor”
and “Device info” pages are available when not logged in. If you have not added a
password, click “login” to access the other pages.
6. Click on “Device” then select “Change password” to add password protection to
the web server interface. NOTE: This is separate from the password protection on
the Client Software interface. Remember the password! This cannot be reset.