User`s manual

iNspect Express User’s Manual405-00026-00
101Rev 1600; 12 July 2010
System Administration and Password Protection
To prevent others from changing your Solution, you can enter a password for your Vision Sys-
tem. Without the password, others can only access the Monitor screen, to view the Run screen
only. The password limit is 6 to 15 characters.
a. Click the “User Admin” button, in the main panel. Log in as the Administrator to make
changes. You should change the default Administrator password.
b. Click the “Enable” checkbox if you wish to enable user accounts, and require a password
each time Internet Explorer tries to access the Vision System. Clear the checkbox if you do
not want to require logins. Anyone can view the Monitor panel with out logging in.
c. Click the “iCollect Setup” button to set up collecting system events.
Enter the Administrator password and click “Log In”.
Click this checkbox if you wish to enable user
The button changes to “Log Out”.
accounts and logging in. Clear the check box to disable.
Create a new User Account.
Exit this panel and go back one level.
Select or Clear options for the selected User.
Delete the selected User Account.
Change a user account password.
Import User Accounts information.
Export User Accounts information.
Collect a log of system events.
Does Not log you out!
Automatically log out administrator if idle for this long.
System Administration Panel
User name is limited to 31 characters maximum. Full Name is limited to 63 characters maximum.
Passwords are limited to 6 characters minimum and 15 characters maximum.