User`s manual

405-00026-00iNspect Express User’s Manual
102 Rev 1600; 12 July 2010
NOTE The default password for the Administrator account is “ipdadmin”. It is your
responsibility to change the Administrator password. This is an Application
password for the iNspect and iLabel applications, not for Windows or the Vision
System.
iCollect
The iCollect application creates a log of system events, and IP Addresses, on all Vision Systems
connected and enabled for iCollect. One host PC must be running the iCollect application.
System events collected are: successful and failed log-in to iNspect or iLabel, Log out, Save
Solution, Load Solution, Stop inspecting and Start inspecting.
Enable logging system events.
Enter the Network Name or IP Address of the
system that will collect the Log Events.
Exit this panel and go back one level.
Default is the Appliance network name.
iCollect Panel
If the network connection is lost between the host and Vision System, the log will be stored local-
ly until the connection is reestablished. The Vision System will synchronize the local log with the
host when the connection is reestablished.