User`s manual

405-00026-00iNspect Express User’s Manual
120 Rev 1600; 12 July 2010
In the Delayed Event Function, set the outputs low.
Delayed Event – 60 ms after Image Process:
If () Global.GPO(1) = 0
If() Global.GPO(0) = 0
The Delayed Event Function can also be used to clear or reset PLC registers or other external
devices.
Related Functions
You can use the Solution Initialize Function to clear or set outputs and PLC registers when you
load a solution.
You can use the Pre Image Process Function to set or clear outputs and PLC registers after the
image is acquired, and before the image is processed.