User`s manual

405-00026-00iNspect Express User’s Manual
124 Rev 1600; 12 July 2010
After the inspection is processed, the “Post Image Process” function is executed one time. This
function should output the inspection results to the appropriate Control Logix tag(s). The vari-
able, “Once” in this example, that keeps the Periodic Function trigger from happening multiple
times should be reset.
The arrows to the right, between the Edit and Del buttons, are used to put the statements in the
correct order. The statements are evaluated in the order they appear in this panel, from top to bot-
tom.
The measurements used here were MS1 and MS2 (Match Tool). You could alert the PLC that a
different tool failed; for example the Distance Tool, by substituting (L1.Result !=1) for MS1.Re-
sult in this example. This expression (L1.Result !=1) is True if the L1 Result does not equal Pass.