User`s manual

405-00026-00iNspect Express User’s Manual
8 Rev 1600; 12 July 2010
4.Set up Measurements
a. In the main panel, click on the “Tools” button.
Setting up an inspection involves the following steps:
1. Define a template image (reference image of the part to be inspected).
2. Train the Color Map if you are using a color sensor.
3. Apply vision tools and set up associated pass/fail tolerances.
4. Add a Locator if the part moves within the image area.
5. Exit this panel and set up communications.
Note: you can also define scripts to further customize your application, in the communications
panel.
Take a picture (snap immediate)
Save Image (camera image only, no graphics or tools)
Setup Color (train colors in image)
Customize (change displayed graphics colors)
Snap Triggered (wait for trigger input)
Measurement Tools
Tip Window gives drawing hints or suggestions.
Locator – track movement of the part.
Origin of X,Y coordinates
Eraser – delete a tool.
Edit Tools – cut, copy and paste tools.
Region – selects a drawing shape for some tools.
Tools Setup Panel