User`s manual

405-00026-00iNspect Express User’s Manual
30 Rev 1600; 12 July 2010
Drag boundary
line or drag the
sensitivity
slider.
Edge Count Properties
Count count the number of edges crossed by the outline of the Region.
Avg. Separation measure the Average Separation or average distance between edges.
Min measure the minimum separation or minimum distance between edges.
Max measure the maximum separation or maximum distance between edges.
• Enable – check this box to report a measurement and pass or fail the part on this measurement;
or clear this box to not report a measurement and not pass or fail the part on this measurement.
• Relative – clear the box to report actual numbers; check the box to report difference.
• Auto label position – puts the label (E1, E2) beside the Region in the display. Clear the check
box to move the label to another location (or with the Properties box closed, drag the label).
• Locator – makes the tool follow the Locator, and follow the part. Select a locator (by number)
to follow, or select “X” to disconnect the tool from the locator, or make the tool stay in a fixed
position in the image area.
• Activate edge points – allows you to use the edge points in other tools or the Locator.
• Channel – select a color class or select “Brightness” for (monochrome) intensity.
• Direction – “Dark-Light” means a transition from-dark-to-light. “Light-Dark” means a transi-
tion from-light-to-dark. “Either” means both edges (or transitions).
• Min width – minimum number of pixels in an edge, or the minimum thickness of an edge.