User`s manual

iNspect Express User’s Manual405-00026-00
39Rev 1600; 12 July 2010
Pencil Properties
Slope the slope of the pencil line.
• Enable – check this box to report a measurement and pass or fail the part on this measurement;
or clear this box to not report a measurement and not pass or fail the part on this measurement.
• Relative – clear the box to report actual numbers; check the box to report difference.
• Auto label position – puts the label (P1, P2) beside the pencil line in the display. Clear the
check box to move the label to another location (or with the Properties box closed, drag the
label).
• Locator – makes the tool follow the Locator, and follow the part. Select a locator (by number)
to follow, or select “X” to disconnect the tool from the locator, or make the tool stay in a fixed
position in the image area.
h.
Click on the padlock button to lock the value for “Perfect” so it does not change as you
adjust or move your measurement.
i. Click the “Preprocess” button
to add image filtering, or feature enhancement. Adding
preprocessing may increase inspection time. Please refer to page 15.
j. Click the “check” button
to accept changes and close the Pencil Properties box. Click
the X button
to close without changes.