User`s manual

405-00026-00iNspect Express User’s Manual
48 Rev 1600; 12 July 2010
Barcode Properties
• Auto label position – puts the label (Barcode1) beside the tool or region in the display. Clear
the check box to move the label to another location (or with the Properties box closed, drag the
label).
• Locator – makes the tool follow the Locator, and follow the part. Select a locator (by number)
to follow, or select “X” to disconnect the tool from the locator, or make the tool stay in a fixed
position in the image area.
• Channel – select a color class or select “Brightness” for (monochrome) intensity.
• System – barcode type. Note: When you initially draw the rectangle, the barcode tool scans
through the list of known codes or types, and uses the first type that yields a reading. This may
not be the correct code type. You can change the type using the drop-list.
• Background – “Light” means dark lines on a light background. “Dark” means light lines on a
dark background.
• Ignore positions – skips or ignores character positions in the string. You could ignore unimpor-
tant, unrelated or changing positions. Enter position numbers (only) separated by spaces. Use
1 for the first character position (not 0), use 2 for the second character, etc.. Use –1 for the last
character, use –2 for the next to last or second from last character.
• Ignore characters – skips or ignores characters that sometimes are added to some barcodes.