User`s manual

iNspect Express User’s Manual405-00026-00
83Rev 1600; 12 July 2010
Exit this panel and go back to the main panel.
Open the script editor or variable manager.
Add an equation or an expression for communicating
Pull down to select the PLC type..
Enable or disable saving images and data to the
BOA memory. Enable or disable saving images to
the ClientPC hard drive or a network device.
with a defined PLC or external logic device.
Click to configure communication with the PLC.
Pull down to select the expansion module type.
Click to configure communication with the module.
Click to configure BOA inputs.
Click to configure BOA outputs.
Control Setup Panel
Add I/O Connections
Future capability, not supported in the current release.
PLC Connections
Use the drop list to select a pre-defined PLC type, or TCP/IP device. Click the “add a (type) PLC”
to configure the Addressing or protocol options. At the time of this printing, the pre-defined PLC
types are: Control Logix, Ethernet-IP, GE Fanuc SNP, GE Fanuc SRTP Ethernet, Melsec, Mod-
bus, Motoman MRC, and Omron. Each of these has its own setup panel. Refer to the online Help.
Setup I/O Connections
Setup I/O Connections configures the Input and Output pins on the BOA vision system I/O Con-
nector. The Configuration and Status panel changes when you click the Input or Output buttons.