User`s manual

Genie Color Series-GigE Vision Camera Operational Reference • 41
Window ROI Control via Sapera LT or GigE Vision Compliant
Applications
Sapera
Genie Sapera parameters for Partial Scan and Window ROI:
Width = Buffer width in pixels (must be an even value)
Height = Buffer height in lines
OffsetX = Horizontal Offset of the leftmost pixel relative to the sensor (must be an even value)
OffsetY = Vertical offset in lines of the uppermost pixel relative to the sensor
PixelFormat = {Bayer Raw8/RGB 32-bit/UYVY/YUY2}
See "
Accessing Features with Sapera++ LT" on page 66.
XML features for Partial Scan and Window ROI:
Width = Width of image/area of interest (must be an even value)
Height = Height of image/area of interest
OffsetX = Left coordinate of area of interest (must be an even value)
OffsetY = Top coordinate of area of interest
LinePitch = Distance between consecutive lines in bytes
PixelColorFilter = Color filter convention of the image
PixelFormat = Format of the image pixels as per GigE Vision specification
PixelDynamicRangeMin = Minimum pixel value sent by camera
PixelDynamicRangeMax = Maximum pixel value sent by camera
CamExpert Image Buffer and ROI Parameters
CamExpert provides controls to configure acquisitions via the Image Buffer and ROI Parameters tab. The image
buffer can be easily cropped as desired. Below is the CamExpert dialog and parameter descriptions follow.