User`s manual

Genie Color Series-GigE Vision Camera Operational Reference • 67
Feature Type ENUM
Feature Name Acces
s
W-mode Type Values
Interface RO N.valid ENUM GigE Vision = 0
DeviceScanType RO N.valid ENUM Area scan = 0
Linescan = 1
ColorType
(dependent on camera model)
RO N.valid ENUM Monochrome Sensor = 0
CFA Bayer Sensor GR = 1
CFA Bayer Sensor RG = 2 (current)
CFA Bayer Sensor GB = 3
CFA Bayer Sensor BG = 4
RGB Sensor = 5
ExposureMode RW N.acq ENUM Programmable = 1
Pulse Controlled = 2
ExposureAlignment RW N.acq ENUM Synchronous = 0
Reset = 1
FlatFieldFormat
(dependent on camera model)
RO N.conn ENUM Mono 8 - Unsigned = 16844800
Mono 9 - Unsigned = 16779520
Mono 10 - Unsigned = 16779776
RGB = 1124075520
Flip RW ENUM Off = 0 (future feature)
Horizontal = 1
TestImageSelector RW Always ENUM Off = 0
Grey Horizontal Ramp = 1
Grey Vertical Ramp = 2
Grey Diagonal Ramp Moving = 3
Purity = 4
Color = 5
LUTFormat
(dependent on camera model)
RO N.valid ENUM Mono 8 – Unsigned = 16844800
Mono 8 – Signed = 285280256
Mono 9 – Unsigned = 16779520
Mono 9 – Signed = 285214976
Mono 10 – Unsigned = 16779776
Mono 10 – Signed = 285215232
RGB = 1124075520 (color Genie)
TriggerSource RW N.acq ENUM Input 1 = 0
Input 2 = 1
Software = 2
OutputSelectorOutput_1 RW Always ENUM Open = 0
Close = 1
Strobe On: Start of Exposure = 2
Pulse On: Valid Trigger = 4
Pulse On: Invalid Trigger = 5
Pulse On: Start of Readout = 6
Pulse On: End of Readout = 7
Pulse On: End of Acquisition = 8
Pulse On: Input 1 = 9
Pulse On: Input 2 = 10