User`s manual
Genie Color Series-GigE Vision Camera Operational Reference • 69
Feature Type INT32
The feature list for type INT32 has an additional column 'Exponent' which defines the feature's native unit. This
exponent value is used as a unit multiplier so that the feature value is expressed as an integer, not a decimal number.
• As an example from the following table, the Genie frame rate is 60000 with an exponent of 3. Therefore the
frame rate native unit is mHz. The current value shown – 60000 mHz, is actually 60.000 Hz.
Feature Name Acces
s
W-mode Type Exponent Sample Value
DeviceMaxThroughput RO N.valid INT32 EXP10: 0 18432000
SensorWidth RO N.valid INT32 EXP10: 0 1024 (example)
SensorHeight RO N.valid INT32 EXP10: 0 768 (example)
FrameRate (mHz) RW Always INT32 EXP10: 3 20000
BlackLevel RW Always INT32 EXP10: 0 0
Gain RW Always INT32 EXP10: 1 0
GainRed RW Always INT32 EXP10: 1 0
GainGreen RW Always INT32 EXP10: 1 0
GainBlue RW Always INT32 EXP10: 1 0
ExposureTime (μS) RW Always INT32 EXP10: 6 16384
TriggerDelayToIntegration (μS) RW Always INT32 EXP10: 6 0
FramesPerTrigger RW Always INT32 EXP10: 0 1
LUTNumberEntries RO N.valid INT32 EXP10: 0 256
DebounceInput_1 (μS) RW Always INT32 EXP10: 6 10
DebounceInput_2 (μS) RW Always INT32 EXP10: 6 10
PulseDelayOutput_1 (μS) RW Always INT32 EXP10: 6 0
PulseDurationOutput_1 (μS) RW Always INT32 EXP10: 6 0
PulseDelayOutput_2 (μS) RW Always INT32 EXP10: 6 0
PulseDurationOutput_2 (μS) RW Always INT32 EXP10: 6 0
Width RW N.conn INT32 EXP10: 0 1024
Height RW N.conn INT32 EXP10: 0 768
OffsetX RW N.conn INT32 EXP10: 0 0
OffsetY RW N.conn INT32 EXP10: 0 0
SaperaBufferFormat RO N.valid INT32 EXP10: 0 1628311552
PixelSize RO N.valid INT32 EXP10: 0 16
InterPacketDelay (μS) RW N.acq INT32 EXP10: 6 0
PacketSize RW N.conn INT32 EXP10: 0 1500
HeartbeatTimeout (mS) RW Always INT32 EXP10: 3 500
MaximumPacketResend RW N.conn INT32 EXP10: 1 10
LUTData RW N.conn Buffer
FlatFieldGainBuffer RW N.conn Buffer
FlatFieldOffsetBuffer RW N.conn Buffer
FlatFieldGainMin RO N.conn INT32 EXP10: 0 (see note 1)
FlatFieldGainMax RO N.conn INT32 EXP10: 0 (see note 1)
FlatFieldOffsetMin RO N.conn INT32 EXP10: 0 (see note 1)