User`s manual

82 • Network Overview & Tools Genie Color Series-GigE Vision Camera
To recover a Genie:
• Start the Network Configuration program from the windows start menu: Start•Programs•DALSA•Network
Interface•DALSA Network Configuration Tool.
• From the menu bar click on Advanced and then on Recover Camera.
• On the dialog enter the camera MAC address and click the Recover Camera button.
Camera Recovery Dialog
• If the camera requires a persistent IP address, select the bullet to assign a persistent IP immediately with
recovery. Enter the new IP address and click on Recover Camera.
Important: Any changes made with this tool will update the Genie flash memory. Do not remove power from the
Genie camera for a minimum 10 seconds. Then cycle the Genie power to load the new flash settings.