User`s manual

Genie Color Series-GigE Vision Camera Technical Specifications • 93
Additional Notes on Genie Mechanical
Genie supports a screw lock Ethernet cable (see "
Ruggedized RJ45 Ethernet Cables" on page 102).
For information on Genie lens requirements see "
Optical Considerations" on page 98.
Lens flange focal distance = 17.52 mm for C-mount.
Lens flange focal distance = 12.52 mm for CS-mount.
The camera top also has four mounting holes in identical locations.
Connectors
• A single RJ45 Ethernet connector for control and video data to the host Gigabit NIC. Genie is available with
an industrial case supporting a screw lock Ethernet cable (see "
Ruggedized RJ45 Ethernet Cables" on page
102).
• A single 12-pin Hirose male connector for power, trigger and strobe signals. The suggested female cable
mating connector is Hirose model HR10A-10P-12S.
12-Pin Hirose Connector Signal Details
The following figure shows the pinout identification when looking at the Genie camera 12-pin male Hirose
connector. The table below the figure lists the Genie I/O signal specifications.