User`s manual

Pantera 1M60 and 1M30 User’s Manual 25
DALSA 03-032-10033-09
Mode 7: Internal Line Rate, Maximum Exposure Time
In this mode, the line rate is set internally with a maximum exposure time.
Figure 9: Mode 7 Camera Timing
FT
Re ad o u t
FT
Re ad o u t
Ex po sur e T i me
Ex po su r e T i me
Fr ame Per i o d Fr ame Per i od
3.7.2 Step 2: Enabling or Disabling Exposure Control
(Exposure Mode 3 Only)
Camera must be operating in exposure mode 3.
Disabling exposure control allows the Pantera 1M60 camera to operate at a maximum of
60 fps. When exposure control is enabled, the maximum Pantera 1M60 frame rate is 57
fps.
The frame rate is not affected in the Pantera 1M30 and remains a maximum of 32 fps with
exposure mode enabled or disabled.
To enable or disable exposure control, use the command:
Syntax:
sec i
Syntax Elements:
i
0
Exposure control disabled resulting in a frame rate of 60 fps (1M60)
or 32 fps (1M30).
1
Exposure control enabled resulting in a frame rate of 57 fps (1M60)
or 32 fps (1M30).
Notes:  Exposure control is only programmable when the camera is operating
in exposure mode 3.
 See
Table 7: Overview of Pantera 1M60 and 1M30 Exposure Modes for
details on which exposure modes operate with exposure control
enabled and which operate with exposure mode disabled.
Example:
sec 1