User`s manual

Pantera 1M60 and 1M30 User’s Manual 29
DALSA 03-032-10033-09
1x2, 2x2, 4x2, 8x2 15.654 ms 58.745 fps
1x4, 2x4, 4x4, 8x4 8.5952 ms 100.336 fps
1x8, 2x8, 4x8, 8x8 4.9152 ms 158.949 fps
Table 11: Pantera 1M60 Binning vs. Speed using Dual Output and Exposure Control Enabled
Binning (HxV) Read out Time (mS) Frame Rate
1x1, 2x1, 4x1, 8x1 16 ms 57.626 fps
1x2, 2x2, 4x2, 8x2 8.614 ms 100.312 fps
1x4, 2x4, 4x4, 8x4 5.017 ms 156.865 fps
1x8, 2x8, 4x8, 8x8 3.1744 ms 220.415 fps
Table 12: Pantera 1M60 Binning vs. Speed using Dual Output and Exposure Control Disabled
Binning (HxV) Read out Time (mS) Frame Rate
1x1, 2x1, 4x1, 8x1 15.3856 ms 59.792 fps
1x2, 2x2, 4x2, 8x2 8.5112 ms 102.984 fps
1x4, 2x4, 4x4, 8x4 4.941 ms 159.241 fps
1x8, 2x8, 4x8, 8x8 3.136 ms 223.464 fps
3.10 Rebooting the Camera
The command rc reboots the camera. The camera starts up with the last saved settings.
3.11 Setting the Pre-trigger
A pre-trigger may be required for some frame grabbers.
To set the pre-trigger, use the command:
Syntax:
sp i
Syntax Elements:
i
Pretrigger value from 0 to 15.
Example:
sp 10
3.12 Setting the Video Mode and Generating Test
Patterns
To set the video mode, use the command:
Syntax:
svm i
Syntax Elements:
i
Video mode to use.
Notes:
• All modes are available in the 1M60.