User`s manual
Table Of Contents
- Introduction to the Falcon XDR and HG Cameras
- Camera Hardware Interface
- Serial Interface: How to Control the Camera
- Serial Protocol Defaults
- Command Format
- 3.1 Setting Baud Rate
- 3.2 Camera Serial Command Help Screen
- 3.3 Retrieving Information About the Camera
- 3.4 First Power Up Camera Settings
- 3.5 Saving and Restoring Settings
- 3.6 Camera Output Format
- 3.7 Setting Exposure Mode, Frame Rate and Exposure Time
- 3.8 Setting a Vertical Window of Interest
- 3.9 Flat Field Correction
- 3.10 Gain Adjustments
- 3.11 Generating a Test Pattern
- Optical and Mechanical Considerations
- Troubleshooting
- Appendix A: Camera Link™ Reference, Timing, and Configuration Table
- Appendix B: Error Handling and Command List
- Appendix C: EMC Declaration
- Technical Support
- Index
Falcon XDR and HG Series Camera User's Manual DALSA
Index 93
Index
A
antiblooming, 11
B
background subtract, 61
base configuration, 21
baud rate, 30
bright lines, 73
C
calibration
overview, 48
steps, 48
camera
output configuration, 34
camera control signals, 23
camera getsettings
retrieving, 32
camera information, 32
Camera Link
configuration, 21, 35
configurations, 22
connector, 21
inputs, 23
mode, 35
outputs, 24
camera settings
current, 33
factory, 33
restoring, 33
saving, 33
user, 33
clock signals, 24
coefficients, 53
command
format, 30
list, 81
parameters, 30
connector, 20
Camera Link, 21
power, 25
control configuration, 76
control signals, 76
D
dark patches, 73
data bus, 24
data rate, 11
DC offset, 11
DVAL, 76
E
EIA-644 Reference, 75
electrical specifications, 10
EMC Declaration of Conformity, 89
EXSYNC, 24
F
fiber-optic light sources, 68
filters, 68
flat field correction, 48
FPN, 48
FPN calibration, 54
FVAL, 76
G
Get Command Parameter, 32
H
halogen light sources, 68