User`s manual

28 PRELIMINARY Linea 2K, 4K, 8K and 16K Camera User's Manual
03-032-20206-01 Teledyne DALSA
4. Camera Operation
Factory Settings
The camera ships and powers up for the first time with the following factory settings:
 Camera Link Full, 8 bit pixels
 Internal trigger, line rate 10 kHz
 Internal exposure control, exposure time 50 µs
 1x horizontal and vertical binning
 Offset 0, Gain 1x
Check Camera and Sensor Information
Camera and sensor information can be retrieved via a controlling application—for example, the
CamExpert GUI shown in the following examples. Parameters such as camera model, firmware version,
sensor characteristics, etc. are read to uniquely identify the connected device.
The camera information parameters are grouped together as members of the Camera Information set.
Figure 11. CamExpert’s Camera Information Window