User`s manual

Linea 2K, 4K, 8K and 16K Camera User's Manual PRELIMINARY 37
Teledyne DALSA 03-032-20206-01
Set Image Size
To set the height of the image, and therefore the number of lines to scan, use the parameters grouped
under the Image Format Control set.
Image Format Control
Control the size of the transmitted image
Width
Width of the image. Read only.
Height
Height of the image in lines. Read only.
Pixel Format
Mono 8 or Mono 12 bit depth to Camera Link.
Test Image Selector
Select an internal test image:
Off
Ramp
A5
Each Tap Fixed
All 1365
All 1
Set Baud Rate
The baud rate sets the speed (in bits per second—bps) of the serial communication port and is available as
part of the Serial Port Control parameters.
Serial Port Control
Action
Parameter
Options
Control the baud rate used by the
camera‘s serial port
Baud Rate
9600 (factory default)
19200
57600
115200
230400*
460800*
Note: During connection CamExpert
automatically sets the camera to
maximum allowable baud.
*A PX4 or equivalent frame grabber is
required in order to achieve these baud
rates.
Number of bits per character used in the
serial port
Data Size
8
Parity of the serial port
Parity
None
Number of stop bits per character used
in the serial port
Number of Stop
Bits
1