User`s manual

38 PRELIMINARY Linea 2K, 4K, 8K and 16K Camera User's Manual
03-032-20206-01 Teledyne DALSA
Pixel Format
Use the Pixel Format feature, found in the Image Format Control set, to select the format of the pixel to
use during image acquisition as either Mono 8 or Mono 12 bit depth.
Image Format Control
Parameter
Description
Pixel Format
Mono 8*
Mono 12
*Only available format for Full Camera Link
configurations.
Pixel Readout Direction (Mirroring Mode)
Set the tap readout from left to right or from right to left. This feature is especially useful if you want to
mount the camera ―upside down.‖
Image Format Control
Parameter
Description
Line Mirroring
Off: All pixels are read out from left to right.
On: All pixels are read out from right to left.
Resetting the Camera
The feature Camera Reset, part of the Transport Layer set, resets the camera. The camera resets with the
default settings, including a baud rate of 9600.
Transport Layer
Parameter
Description
Camera Reset
Resets the camera and puts in the default settings, including a 9600 baud
rate.