User`s manual

Linea 2K, 4K, 8K and 16K Camera User's Manual PRELIMINARY 43
Teledyne DALSA 03-032-20206-01
Appendix A: GenICam
Commands
This appendix lists the available GenICam camera features. Access these features using the CamExpert
interface.
Features listed in the description table but tagged as Invisible are typically reserved for Teledyne DALSA
Support or third party software usage, and not typically required by end user applications.
Camera Information Category
Camera information can be retrieved via a controlling application. Parameters such as camera model,
firmware version, etc. are read to uniquely identify the connected Linea device. These features are
typically read-only.
The Camera Information Category groups information specific to the individual camera. In this category
the number of features shown is identical whether the view is Beginner, Expert, or Guru.
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or third
party software usage—not typically needed by end user applications.
A note on the CamExpert examples shown here: The examples shown for illustrative purposes and may
not entirely reflect the features and parameters available from the camera model used in your
application.