User`s manual

54 PRELIMINARY Linea 2K, 4K, 8K and 16K Camera User's Manual
03-032-20206-01 Teledyne DALSA
Image Format Control Feature Description
The following table describes these parameters along with their view attribute and minimum camera
firmware version required. Additionally the firmware column will indicate which parameter is a
member of the DALSA Features Naming Convention (DFNC), verses the GenICam Standard Features
Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a firmware revision
number.
Display Name
Feature
Description
Device
Version
& View
Test Pattern
TestImageSelector
Selects the type of test image that is sent
by the camera. Choices are either as
defined by SNFC and/or as provided by
the device manufacturer.
1.00
Beginner
DFNC
Off
Off
Selects sensor video to be output from
sensor
Ramp
Ramp
Selects a grey scale
Line Mirroring
ReverseX
1.00
Beginner
DFNC
Off
On
Off
On
Video output in normal order
Video output in a reverse order
Pixel Format
Pixel Format
Output image pixel coding format of the
sensor.
1.00
Beginner
DFNC
Width
Width
Width of the Image provided by the
device (in pixels).(RO)
1.00
Beginner
Max Width
WidthMax
The maximum image horizontal
dimension of the image. (RO)
1.00
Beginner
Height
Height
Height of the Image provided by the
device (in lines). (RO)
1.00
Beginner
Input Pixel Size
pixelSizeInput
Size of the image input pixels, in bits per
pixel. (RO)
1.00
DFNC
Guru
8 Bits/Pixel
12 Bits/Pixel
Bpp8
Bpp12
Sensor output data path is 8 bits per
pixel.
Sensor output data path is 12 bits per
pixel.
Multiple AOI Mode
Off
Active
multipleAOIMode
Off
Active
Turns on an output Area of Interest
Area of interest is off
Area of interest is on
1.00
Beginner
DFNC
Multiple AOI Count
multipleAOICount
Set the number of output area of interest
1-4
1.00
Beginner
DFNC