User`s manual

Linea 2K, 4K, 8K and 16K Camera User's Manual PRELIMINARY 55
Teledyne DALSA 03-032-20206-01
Multiple AOI Selector
multipleAOISelector
Selects the area of interest to be setup
1.00
Beginner
DFNC
AOI Offset X
multipleAOIOffsetX
Set the start of area of interest (pixels)
1.00
Beginner
AOI Width
multipleAOIWidth
Set the width of area of interest (pixels)
1.00
Beginner
DFNC
Binning
Binning is the combining of two or more image sensor pixels to form a new combined pixel. A binned
image using the same exposure settings as a non-binned image will show an improved signal-to-noise
ratio, reduced scanning times (due to lower spatial resolution) and save as a smaller image file size
compared with a non-binned image, at the expense of lower image resolution.
In 2 x 2 binning, 4 physical pixels on the sensor are combined into one image pixel. This operating mode
is ideal for applications that require faster acquisition and processing times and require greater signal
collection.
For this camera, the default binning value is 1 x 1,
The Binning Vertical and Binning Horizontal features in the Image Format Control set represents the
number of horizontal pixels that will be combined (added) together.
Image Format Control
Parameter
Description
Binning Vertical
This feature represents the number of vertical photo-
sensitive cells that must be combined (added) together: 2.
Binning Horizontal
This feature represents the number of horizontal photo-
sensitive cells that must be combined (added) together.
Figure 17: 2x2 Binning in Area Mode