Specifications

GEVA User’s Reference405-00024-00
15Rev 02; 9 November 2010
Components
Figure 1 illustrates the physical components associated with a typical GEVA installation. Infor-
mation on connector pinouts can be found in this Chapter, or in Appendix A starting on page 40.
Information on electrical characteristics can be found starting on page 28.
detector
Kicker
GEVA
Figure 1. GEVA Installation
NOTE: Not all of the physical interfaces are used by the GEVA software. They are, however,
available to the user for interfacing with third party products, if required.
CAUTION: The enclosure includes air intake holes at the top and sides of the unit and a small
exhaust fan on one side. For the continued reliability of the system, it is important that these areas
are not obstructed when the unit is mounted.