Specifications

GEVA User’s Reference405-00024-00
19Rev 02; 9 November 2010
Camera Connections
The Genie cameras offer a range of resolutions from 640x480 pixels up to 1600x1200. DALSA
offers cameras for use with our vision systems, some of which are referenced below. The Genie
camera manuals are installed on the hard drive with the Genie drivers, and are available from the
Windows Start menu.
The camera interface supports:
• Progressive scan digital GigE (Gigabit Ethernet) cameras with standard or double-speed capa-
bilities. Sherlock and iNspect support asynchronous camera acquisition.
• The RJ45 connectors can be connected to multiple cameras using external GigE switches.
Recommended Camera List
The following cameras are offered by DALSA. Consult DALSA for alternate choices if required.
Model
Type Resolution Full frame speed
Genie M640 monochrome 640x480 64 fps
Genie M1024 monochrome 1024x768 20 fps
Genie M1400 monochrome 1360x1024 15 fps
Genie M1600 monochrome 1600x1200 12 fps
Genie C640 color 640x480 64 fps
Genie C1024 color 1024x768 20 fps
Genie C1400 color 1360x1024 15 fps
Genie C1600 color 1600x1200 12 fps
• Sherlock has no limit on the number of cameras supported.
• iNspect “Standard” license supports up to 4 cameras. iNspect “Extended” license supports up
to 8 cameras.
• The hardware design does not limit how multiple cameras are connected. To improve data
throughput, it is recommended multiple cameras be connected using both connectors, but the
design does not require it.
Camera Settings
NOTE Cameras are configured with different IP Addresses that match the two different
GigE Port addresses on the GEVA. The cameras cannot be swapped between the
two camera ports.
In the factory default setting, GEVA Camera Port 1 is set to IP Address 10.1.64.5, and GEVA
Camera Port 2 is set to IP Address 10.1.128.7. Subnet Mask 255.255.192.0. The VA-Genie Cam-