Specifications

GEVA User’s Reference 405-00024-00
30 Rev 02; 9 November 2010
Output Electrical Specifications
GEVA outputs OUT(7–0) STRB1 and STRB2 are solid-state relays that can operate up to 30
Volts. They do not require external pull-up or pull-down resistors. They are polarity insensitive
and exhibit no contact bounce. The outputs can drive with the following specification:
Parameter
Max
Output Voltage 30 V
Output Sink Current 125mA@20°C
50mA@85°C
On Resistance 12 Ohm
PNP Configuration
5–30 V
GEVA
Load
COM
OUT
+
–
NPN Configuration
5–30 V
GEVA
Load
COM
OUT
–
+
Figure 14. Typical Output Wiring Diagram