Specifications

405-00024-00GEVA User’s Reference
44 Rev 02; 9 November 2010
Trigger/Strobe/Power Connector
The trigger inputs, strobe outputs, and auxilliary power outputs are available on one 12-pin Mo-
lex connector, located on the rear panel. Inputs and Outputs are solid state and polarity insensi-
tive. Each input and output has its own “Common” pin. Electrical specifications and connection
diagrams appear on pages 28 through 30.
Trigger/Strobe/Power Connector Definitions
Pin # Label Definition Direction
1 TRIG1 IN Trigger 1 input for Camera 1 GEVA Input
2 TRIG1 COM Common for Trigger 1
3 TRIG2 IN Trigger 2 input for Camera 2 GEVA Input
4 TRIG2 COM Common for Trigger 2
5 STRB1 OUT Strobe 1 output from Camera 1 GEVA Output
6 STRB1 COM Common for Strobe 1
7 STRB2 OUT Strobe 2 output from Camera 2 GEVA Output
8 STRB2 COM Common for Strobe 2
9 12V OUT 12 Volt DC output @ 500 mA max.
10 PWR GND Ground for 12 Volts & 5 Volts
11 5V OUT 5 Volt DC output @ 500 mA max.
12 PWR GND Ground for 12 Volts & 5 Volts
Pins 10 and 12 are internally connected.
Figure 23. Trigger/Strobe/Power Connector