Specifications

GEVA User’s Reference405-00024-00
45Rev 02; 9 November 2010
Local Access Network (LAN) Connector
The 10/100/1000 Ethernet RJ-45 connector is an 8-pin male connector. The factory default is
DHCP or Dynamic IP Addressing. You can use this port for a third camera if you do not need a
network connection. This port is defined in Windows as PCI Bus 1 Device 0. This information
may be needed if you must install a custom hardware driver.
NOTE Do not enable “Jumbo Frames” on this port if your network does not support it.
Enabling “Jumbo Frames” when not supported may cause difficulty accessing
the network.
Ethernet Pinout
Pin Name Description
1 BI_DA+ Bi-directional pair A +
2 BI_DA– Bi-directional pair A –
3 BI_DB+ Bi-directional pair B +
4 BI_DC+ Bi-directional pair C +
5 BI_DC– Bi-directional pair C –
6 BI_DB– Bi-directional pair B –
7 BI_DD+ Bi-directional pair C +
8 BI_DD– Bi-directional pair C +
USB Connectors
The two USB 2.0 connectors are identical, rectangular type-A, 4-pin sockets.
USB Pinout
Pin Name Direction Description
1 VCC Out Power, +5 V (1 A max)
2 DATA– I/O Data–
3 DATA+ I/O Data+
4 GND – Ground