Specifications

GEVA User’s Reference405-00024-00
55Rev 02; 9 November 2010
2. If more than one camera is connected, pull down the “Device” list and click on the camera
name (“Camera1” in Figure 30) to select that camera for editing. The parameter settings for
the selected camera, are displayed in the Parameters pane.
Figure 30. Selecting a Camera
Several Camera Configuration files are included on the GEVA, in the CamExpert default directo-
ry: D:\DALSA\Sapera\CamFiles\User. You can load a file that matches the model of your cam-
era. First click on the camera name (“Camera1” in Figure 30) and then click the file open button,
or select File>Open.
You may get an error message, for one of these reasons:
• The camera’s firmware is out of date.
• The camera type does not match the file (color vs monochrome).
• The file’s image format is too large for the camera model.
• The saved file is out of date, or not compatible with the newer camera firmware.
The following pages and steps show how to set your own configuration.
Device Name
Sherlock and Sapera LT identify cameras by their Device Name or User Device ID. iNspect iden-
tifies cameras by Serial Number. The factory default Device Name is the camera serial number, as
shown in Figure 31. You can change the name to something more useful to you, for example:
“Camera1” or “TopView”.
1. Click in the field to the right of “Device User ID”. Enter a new name.