Specifications

GEVA User’s Reference405-00024-00
57Rev 02; 9 November 2010
Figure 33. Setting the Color Mode
White Balance
Color Calibration (White Balance) should be performed on every color camera. (White Balance
can also be performed in iNspect.)
1. Place a white object under the camera, adjust the aperture on the lens so that the white object
is not bloomed out. It is best that entire field of view is white.
2. Click on the “Sensor” tab (Figure 34, color camera shown).
3. Click on “Setting” beside “Color Calibration” and a dialog box will open.
Figure 34. Sensor Tab, Color Calibration
4. Click the “Auto White Balance” button.
NOTE The camera must acquire images to perform a White Balance. The camera
should be free running, or you should supply a trigger using an external trigger
signal, or click on the Trigger button above the Image display pane.