Specifications

405-00024-00GEVA User’s Reference
58 Rev 02; 9 November 2010
Trigger and Strobe
1. Click on the “I/O Controls” tab (Figure 35).
2. Change the value beside “Trigger” to “True” to enable the external trigger mode.
Sherlock always uses triggered mode. This setting will be overwritten by Sherlock if you select
FALSE (FALSE is free-running).
Genie cameras have 2 inputs and 2 outputs on the 12-pin Hirose connector, that can be used as
camera trigger input, strobe output, and general purpose I/O. The GEVA only uses Input 2.
3. Select Input 2 as the Trigger Source, if the trigger is coming from the 7 pin connector on the
GEVA. You can use either Input 1 or Input 2 if you are triggering the camera directly (not
through the GEVA connectors), or through the DCI-100 connectors.
Figure 35. I/O Tab