Specifications

VA6x User’s Reference405-00022-00
17Rev 06; 7 April 2011
Camera Connections
The standard camera that ships with the product has a resolution of 640x480 pixels, but this is
expandable up to 1600x1200. Different size cameras are available to suit application space
constraints.
Teledyne DALSA offers cameras for use with our vision systems, some of which are referenced
below. See also directory: D:\PDF Manuals for available camera manuals.
NOTE When you order the camera from Teledyne DALSA with the VA61, it will be
tested with the cables and Vision Appliance that are being shipped to you. Fur-
thermore, the VA61will have the appropriate configuration file loaded, making
for a smooth out-of-the-box experience.
The camera interface supports:
• 2 camera inputs, supporting progressive scan digital GigE (Gigabit Ethernet) cameras with
standard or double-speed capabilities. Sherlock supports 2 asynchronous cameras. iNspect
and iLabel solutions support synchronous cameras; multiple cameras in a single Solution must
be synchronous. iNspect and iLabel do not support color cameras.
Recommended Camera List
The following cameras are offered by Teledyne DALSA. Consult Teledyne DALSA for alternate
choices if required.
Model
Type Resolution Full frame speed
Genie* M640 monochrome 640x480 64 fps
Genie M1024 monochrome 1024x768 20 fps
Genie M1400 monochrome 1360x1024 15 fps
Genie M1600 monochrome 1600x1200 12 fps
Genie C640 color 640x480 64 fps
Genie C1024 color 1024x768 20 fps
Genie C1400 color 1360x1024 15 fps
Genie C1600 color 1600x1200 12 fps
* Standard camera that ships with the VA61.
Sherlock uses a separate configuration file, usually found in the \IFC\Config directory.
Camera Settings
NOTE Cameras ordered with the VA61 are configured with two different IP Addresses
that match the two different GigE Port addresses on the VA61. The cameras can-
not be swapped between the two camera ports.