Specifications

VA6x User’s Reference405-00022-00
29Rev 06; 7 April 2011
The hardware installation is now complete, and you can proceed to setting up the inspection.
Refer to the separate User’s Reference Manuals for iNspect, iLabel, or Sherlock.
VDC
+24
Breakout
Module
detector
Kicker
Figure 13. VA61 Installation
NOTE: Not all of the physical interfaces are used by the VA61 software. They are, however, avail-
able to the user for interfacing with third party products, if required.
CAUTION: The enclosure includes air intake holes at the rear of the unit and a small exhaust fan
on the front. For the continued reliability of the system, it is important that these areas are not
obstructed when the unit is mounted.