Specifications

VA6x User’s Reference405-00022-00
37Rev 06; 7 April 2011
I/O Connector
iNspect/iLabel software overrides settings in the Camera Configuration File, defining the trigger
inputs, strobe and decision outputs. See page 41 for the Sherlock Digital I/O Assignments.
Pin 1
Figure 16. I/O Connector
I/O Connector Definitions
Pin # Direction Definition in iNspect and iLabel
1 – Ground
2 In GPI0 Trigger 1
3 In GPI2 or Solution ID 0
4 In GPI4, Solution ID 2, or Trigger 2
5 In GPI6 or Solution ID 4
6 – Ground
7 Out GPO0, Strobe 1
8 Out GPO2, or Pass in default equations (Pass Cam1 in Async mode)
9 Out GPO4, Strobe 2, or Pass Cam2 in Async mode
10 Out GPO6
11 In Not connected on standard NPN. User Power input on PNP option.
12 Out Fused +12V at 0.75A
13 & 14 – Ground
15 In GPI1 or Change Solution Input
16 In GPI3 or Solution ID 1
17 In GPI5 or Solution ID 3
18 In GPI7 or Solution ID 5
19 – Ground
20 Out GPO1, or Fail in default equations (Fail Cam1 in Async mode)
21 Out GPO3, or Fail Cam2 in Async mode
22 Out GPO5
23 Out GPO7
24 Out Fused +5 V at .75 A
25 – Ground