Specifications

405-00022-00VA6x User’s Reference
38 Rev 06; 7 April 2011
Ethernet and USB Connectors
The 10/100/1000 Ethernet RJ-45 connector is an 8-pin male connector. The factory default is
DHCP or Dynamic IP Addressing. This port is defined as PCI Bus 1 Device 13. You can use this
port for a third camera if you do not need a network connection.
Ethernet
USB
USB
Figure 17. Ethernet and USB Connectors
Ethernet Pinout
Pin Name Direction Description
1 TD+ Out Transmit Data+
2 TD– Out Transmit Data–
3 RD+ In Receive Data+
4–5 NC – not connected
6 RD– In Receive Data–
7–8 NC – not connected
The two USB 2.0 connectors reside below the Ethernet connector. They are identical, rectangular
type-A, 4-pin sockets.
USB Pinout
Pin Name Direction Description
1 VCC Out Power, +5 V (1 A max)
2 DATA– I/O Data–
3 DATA+ I/O Data+
4 GND – Ground